All Categories>
Sponge manufacturers analyze the original type of conductive sponge used in the sensor
Release time:
2020-11-17 17:08
ICPS can be made from a variety of expensive individual, and has a long-term stable electrical performance. The organic chemical sensing of ICPS produces organic chemical sensing due to the liquidity of polymers or the charge transfer transition caused by the mutual influence of charge transfer between polymers. MER and analysis, can be used as a key component of the detection instrument.
Therefore, according to the simple modification of the foam plastic cultivation matrix, its CPS and the characteristics of common architectural coatings, it is possible to reduce the scope of organic chemical discrimination in the sense of comparison. Sponge manufacturers have previously reported the development trend of conductive polymer foam, in the pyrrole to carry out the modified material foaming polyurethane origin convergence experiment basically. In most cases, we describe the process of making foam with active solvent coating processing technology. In this communication, everyone reported on the preparation of low-density conductive polymer perforated foam, which was previously reported by everyone.
The effect of our active solvent coating process and electric resistor on the resulting polypyrrole (PPY)/polyethoxyhexane composite foam exposed to two different volatile organic amines, triethylamine and diethylamine. Perforated foam of methacrylate vulcanizate (PEU) with a relative density of 0.045G/cm3. The foam test article (2.54 x 2.54 x 1.27cm) was adjusted again by placing the foam in an air dryer equipped with a vessel.
Sponge manufacturer Zhenyue believes that the dispersion rate in foam is controlled by placing an air dryer and changing the pre-immersion temperature. After the required storage time, the t foam was moved from the adsorber, weighed, and transferred to the adsorber without pyrrole, and saturated at a volatilization rate of 40°C. The origin convergence of polypyrrolidine, which maintains the foam, was immobilized for two days. Therefore, PEU/PPY composite foam is placed in a brake chamber of at least 96h for all unreflected 2 and Pyr applications. Separated from the foam.
Previous Page
Related News
How to identify natural sponge and artificial sponge?
Compared with artificial sponges, natural sponges do not have static electricity that hurts the human body, do not peel off and last long. The sponge that lives in the sea is the real sponge, and the artificial "sponge" just imitates the structure of the natural sponge. Natural sponges that live in seawater are mostly grayish yellow, brown or black lumps. Its body surface has many bulges, there are many small holes beside the bulge, and there is a large hole at the top of the bulge. Seawater flows in from small holes and out from large holes, and those tiny creatures enter the sponge with the water and become "self-contained" food. Therefore, although the sponge is called "the flowers and fruits of the sea", it looks like a plant, but it is actually an animal.
Buy a pack of large salt or coarse salt, put the coarse salt and dirty plush toys into a larger plastic bag, and then fasten the mouth of the bag tightly and shake it vigorously. You will surely find that the plush toys are clean. The crude salt removed became gray-black due to the adsorption of dirt. The principle is the use of salt that is sodium chloride adsorption of dirt. Soda powder can also be used instead of coarse salt, the same usage. This method is more suitable for large plush toys and plush toys that can not be washed with sound.
The main ingredient of the sponge?
Polyurethane soft foam rubber, polyurethane is one of the most common polymer materials in life, widely used in the production of various "sponge" products. Now there are three kinds of sponges on the market, 1: polyurethane type, burning to generate a large number of cyano-containing gases, these gases are very toxic and suffocating. 2: polyethylene type, combustion of carbon-containing gas, this kind of gas toxicity. 3: polystyrene type, this kind of foam burning decomposition of a small amount of styrene monomer, toxic, but not as toxic as polyurethane.
Sponge manufacturers analyze the performance of packaging sponge products into what
Sponge manufacturers analyze the performance of packaging sponge products into what?
What are the functions of the packaging sponge?
What is the function of packing sponge?
Sponge manufacturers take you to understand the main functions of sponge
What are the main functions of sponge manufacturers to take you to understand?
